Zoeller® 63-0001 M63 Automatic Submersible Pump, Advanced Switch Technology, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 1/3 hp, Cast Iron, Domestic
CBPN: 289806
UPC:053514377281
MPN:63-0001
DESCRIPTION
Zoeller® Submersible Pump, Automatic, Series: M63, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 115 VAC, 9.7 A, 1 ph ph, 130 deg F, 1/3 hp, Non-Clogging Vortex Impeller, Polypropylene Float, 3-Wire Cord, Sleeve Bearing, 1/2 in Maximum Diameter of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-3/32 in W x 10-1/16 in H Dimensions, Domestic
Premium sump pumps are designed with the very best materials and latest technology. Based on the 50 series sump pump, considered one of America's most popular sump pumps, this product offers advanced switch technology allowing longer switch life. This model is constructed of the same heat-dissipating cast iron with epoxy powder coated finish, providing maximum pumping performance under the most extreme conditions. With Zoeller® cool run design, the hermetically-sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product. The heavy-duty power cord also includes an LED lighted plug.
Zoeller® 63-0001 M63 Automatic Submersible Pump, Advanced Switch Technology, 43 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 1/3 hp, Cast Iron, Domestic
CBPN: 289806
MPN:63-0001
UPC:053514377281
DESCRIPTION
Zoeller® Submersible Pump, Automatic, Series: M63, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 115 VAC, 9.7 A, 1 ph ph, 130 deg F, 1/3 hp, Non-Clogging Vortex Impeller, Polypropylene Float, 3-Wire Cord, Sleeve Bearing, 1/2 in Maximum Diameter of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-3/32 in W x 10-1/16 in H Dimensions, Domestic
Premium sump pumps are designed with the very best materials and latest technology. Based on the 50 series sump pump, considered one of America's most popular sump pumps, this product offers advanced switch technology allowing longer switch life. This model is constructed of the same heat-dissipating cast iron with epoxy powder coated finish, providing maximum pumping performance under the most extreme conditions. With Zoeller® cool run design, the hermetically-sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product. The heavy-duty power cord also includes an LED lighted plug.
Specifications
Item Features
- Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology
- Corrosion resistant, powder coated epoxy
- FKM outer switch boot
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Oil filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering 130 deg F
- Passes 1/2 in (12 mm) spherical solids
- Watertight and dust-tight
- Permanently oiled bearings
- Cast iron impeller
- Solid, buoyant, polypropylene float
- Oil filled cooling
- Auto reset thermal overload motor protection
- Stainless steel hardware and neoprene gasket
