Zoeller® 98-0002 Flow-Mate 98-0002 Single Seal Submersible Pump, Non-Automatic/Manual Operation, 72 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 1/2 hp, Cast Iron
CBPN: 300715
UPC:053514029470
MPN:98-0002
DESCRIPTION
Zoeller® Submersible Pump, Single Seal, Series: Flow-Mate 98, 72 gpm, 1-1/2 in NPT Outlet, 23 ft Maximum Head, 1/2 hp, 115 VAC, 9.4 A, 60 Hz, 1 ph, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Cast Iron, 10-1/8 in W x 12 in H
Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.
The nonautomatic Zoeller Model N98 Effluent Pump is engineered for the efficient removal of groundwater from sump or septic system applications. Built for professional-grade performance, the 1/2 HP N98—also known as the “Waste-Mate”—is a proven and dependable manual solution. Its operation is controlled by a piggyback float switch or control panel for operation, allowing you to set the on and off point of the pump in the field. Designed with a vortex-style, plastic impeller, the N98 can handle 2″ spherical solids with ease. Constructed for durability, its motor housing and pump housing are made of rugged cast iron and its dentification tag, handle and hardware are made of non-corrodible stainless steel, making the Model 98 ideal for even the most demanding high glow basement sump pump applications. The Zoeller 98-0002 includes a 15 ft cord. Every Zoeller N98 pump is fully submerged and tested to its published performance curve before shipment, ensuring peace of mind straight out of the box and operations that exceeds expectations.
Zoeller® 98-0002 Flow-Mate 98-0002 Single Seal Submersible Pump, Non-Automatic/Manual Operation, 72 gpm Flow Rate, 1-1/2 in NPT Outlet, 1 ph, 1/2 hp, Cast Iron
CBPN: 300715
MPN:98-0002
UPC:053514029470
DESCRIPTION
Zoeller® Submersible Pump, Single Seal, Series: Flow-Mate 98, 72 gpm, 1-1/2 in NPT Outlet, 23 ft Maximum Head, 1/2 hp, 115 VAC, 9.4 A, 60 Hz, 1 ph, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Cast Iron, 10-1/8 in W x 12 in H
Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.
The nonautomatic Zoeller Model N98 Effluent Pump is engineered for the efficient removal of groundwater from sump or septic system applications. Built for professional-grade performance, the 1/2 HP N98—also known as the “Waste-Mate”—is a proven and dependable manual solution. Its operation is controlled by a piggyback float switch or control panel for operation, allowing you to set the on and off point of the pump in the field. Designed with a vortex-style, plastic impeller, the N98 can handle 2″ spherical solids with ease. Constructed for durability, its motor housing and pump housing are made of rugged cast iron and its dentification tag, handle and hardware are made of non-corrodible stainless steel, making the Model 98 ideal for even the most demanding high glow basement sump pump applications. The Zoeller 98-0002 includes a 15 ft cord. Every Zoeller N98 pump is fully submerged and tested to its published performance curve before shipment, ensuring peace of mind straight out of the box and operations that exceeds expectations.
Specifications
Item Features
- Corrosion-resistant, powder coated epoxy finish
- Cast iron switch case, motor, pump housing and base
- No steel sheet metal parts to rust or corrode
- All castings are cast iron class 25-30 25000 lb tensile strength
- Stainless steel screws, guard, handle, arm and seal assembly
- Float-operated 2-pole mechanical switch
- Permanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protection
- Upper and lower oil-fed cast iron bearing
- Carbon and ceramic shaft seal
- Entire unit pressure-tested after assembly
- Watertight neoprene square ring between motor and pump housing
- Passes 1/2 in spherical solids
- No screens to clog
- 1-1/2 in NPT discharge (1-1/2 x 2 in PVC adapter included with BN and BE Models)
- Packaged systems available
- For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
- 9-1/2 in on point, 3 in off point
