Cooney Brothers
Home
Home
TacoGenie 008-CT-USK Hot Water Circulator with Under Sink Kit

Taco® 008-CT-USK, TacoGenie® Hot Water Circulator with Under Sink Kit, Stainless Steel Casing, 3.6 gpm Flow Rate, 1/2 in MNPT Connection, 115 V, 1 Phase, Domestic

CBPN: 306817

MPN:008-CT-USK

Price:
$898.56 / EA

DESCRIPTION

Taco® 008-CT-USK, TacoGenie® Hot Water Circulator Pump, Stainless Steel, Series: 00, 3.6 gpm Flow Rate, 1/2 in MNPT Connection, 15 ft Maximum Head, 1/25 hp Power, 115 Volts, 0.84 Amps, 60 Hz Frequency, 1 ph, 125 psi Maximum, 3250 rpm Motor, Non-Metallic Impeller, Flange Mounting, 40 to 220 deg F, Carbon Bearing, 7 in H x 6-1/2 in W x 5-21/32 in D Dimensions, Domestic

The TacoGenie™ provides hot water at your command at the same time it saves water, energy and money. The TacoGenie™ is a small, silent pump that you attach to the hot and cold water lines in the cabinet under the most remote kitchen or bath fixture in the home. When the TacoGenie™ pump is activated, the cool water you normally let run down the drain is recirculated back to the water heater through the cold water line.

Taco® 008-CT-USK, TacoGenie® Hot Water Circulator with Under Sink Kit, Stainless Steel Casing, 3.6 gpm Flow Rate, 1/2 in MNPT Connection, 115 V, 1 Phase, Domestic

CBPN: 306817

MPN:008-CT-USK

Price:
$898.56 / EA
 
Taco Comfort Solutions Logo

DESCRIPTION

Taco® 008-CT-USK, TacoGenie® Hot Water Circulator Pump, Stainless Steel, Series: 00, 3.6 gpm Flow Rate, 1/2 in MNPT Connection, 15 ft Maximum Head, 1/25 hp Power, 115 Volts, 0.84 Amps, 60 Hz Frequency, 1 ph, 125 psi Maximum, 3250 rpm Motor, Non-Metallic Impeller, Flange Mounting, 40 to 220 deg F, Carbon Bearing, 7 in H x 6-1/2 in W x 5-21/32 in D Dimensions, Domestic

The TacoGenie™ provides hot water at your command at the same time it saves water, energy and money. The TacoGenie™ is a small, silent pump that you attach to the hot and cold water lines in the cabinet under the most remote kitchen or bath fixture in the home. When the TacoGenie™ pump is activated, the cool water you normally let run down the drain is recirculated back to the water heater through the cold water line.

Specifications

BrandTaco®
Weight11 lbs
Bearing TypeCarbon
Impeller TypeNon-Metallic
Temperature Rating40 to 220 deg F
Flow Rate3.6 gpm
Inlet Size1/2 in MNPT
Outlet Size1/2 in MNPT
Voltage Rating115 V
Phase1
Amperage Rating0.84 A
Body MaterialStainless Steel
Dimensions7 in H x 6-1/2 in W x 5-21/32 in D
Frequency Rating60 Hz
Manufacturer NameTaco
Maximum Head15 ft
Maximum Pressure125 psi
Motor Speed3250 rpm
Mounting TypeFlange
Power Rating1/25 hp
Series00
IncludesHard Wire Pushbutton and (2) Flex Hoses
ApplicationFor Domestic Hot Water
Warranty3 Years
Domestic/ImportDomestic
Country of OriginUS
Standards and ApprovalscULcs Listed | UPC Listed | Power Smart | Handy Man | NSF Certified

Item Features

  • TacoGenie, the pump circulates the hot water from the water heater and returns the cooled water back through the cold water line
  • When the hot water arrives at the fixture, the TacoGenie's heat sensor and control board shut off the pump to prevent pumping excess hot water into the cold water line
  • Note: Standard plumbing and distance requires the TacoGenie™ to be installed between the hot and cold water line at the most distant hot water location
  • Stainless steel casing, steel stator housing
  • 304 stainless steel cartridge
  • Ceramic shaft
  • EPDM O-ring
  • Acetal body, plunger
  • Noryl impeller, carbon bearings
  • CT - TacoGenie™ threaded
  • USK - undersink kit
  • Standard High Capacity Output-Compact Design
  • Quiet, Efficient Operation
  • Direct Drive - Low Power Consumption
  • Unique Replaceable Cartridge - Field Serviceable
  • Self Lubricating
  • No Mechanical Seal
  • Unmatched Reliability - Maintenance Free
  • Cast Iron or Stainless Steel, Flanged and Bronze, Sweat Connections
  • 3/4 in, 1 in, 1-1/4 in, 1/2 in Flanged Connection Sizes