Bonomi North America Ball Valve Package, 2-Way Direct Mount, Series: PVC-BV2, 3 in Nominal, 100 to 240 VAC, FNPT x Socket Weld, 232 psi, 73 deg F, Full Port, Modulating Electric Actuator, 10.6 in Inlet to Outlet Length, 13.66 in Top to Inlet Center, PVC Body, PTFE Trim, EPDM, 8.42 in L x 7.28 in W x 17.79 in H, Import

The valve body, stem, ball and unions shall be made of PVC compound which shall meet classification 12454 of ASTM D 1784.The ball seats shall be made of PTFE and the O-Ring seals shall be made of EPDM. The PVC IPS/Socket connectors shall conform to the dimensional standards ASTM D2466 and ASTM D2467 and the CPVC shall conform to the dimensional standard ASTM F439 (2-way only). The NPT PVC connectors shall conform to the dimensional standards of ASTM D2464, ASTM F1498 and ANSI B1.20.1 thread depths. The electric actuator shall be made from a light weight techno polymer housing, incorporate two auxiliary limit switches, a torque limiter, heater and thermostat, a 75% duty cycle, dual voltage motors and a NEMA 4 enclosure.