
Apollo™ 4ALF20E03D RPLF4A Standard Principle Backflow Preventer, 8 in, Outside Stem and Yoke Flanged, 304 Stainless Steel Body, Reduced Pressure, Domestic
CBPN: 246470
UPC:670750080555
MPN:4ALF20E03D
DESCRIPTION
Apollo™ Principle Backflow Preventer, Standard, Series: RPLF4A, 8 in Nominal, Outside Stem and Yoke Flanged, 175 psi, 33 to 140 deg F, Reduced Pressure Backflow, 304 Stainless Steel Body, Domestic
The Apollo™ Model RPLF 4A Reduced Pressure Principle Backflow Preventers consist of two independently acting, TriForce™ center stem guided check valves with a differential pressure relief valve located between the check valves. The unit is designed to give maximum protection against backflow of health or non-health hazard fluids by either back-pressure or back-siphonage. The durable domestic stainless steel units (2-1/2 in - 8 in) and the FDA epoxy coated ductile iron units (10 in and 12 in) are easily maintained in the line without any special tools. The TriForce™ check valves operate with a spring assist in the flowing condition to provide excellent flow rates which are documented by an independent laboratory.
Apollo™ 4ALF20E03D RPLF4A Standard Principle Backflow Preventer, 8 in, Outside Stem and Yoke Flanged, 304 Stainless Steel Body, Reduced Pressure, Domestic
CBPN: 246470
MPN:4ALF20E03D
UPC:670750080555
DESCRIPTION
Apollo™ Principle Backflow Preventer, Standard, Series: RPLF4A, 8 in Nominal, Outside Stem and Yoke Flanged, 175 psi, 33 to 140 deg F, Reduced Pressure Backflow, 304 Stainless Steel Body, Domestic
The Apollo™ Model RPLF 4A Reduced Pressure Principle Backflow Preventers consist of two independently acting, TriForce™ center stem guided check valves with a differential pressure relief valve located between the check valves. The unit is designed to give maximum protection against backflow of health or non-health hazard fluids by either back-pressure or back-siphonage. The durable domestic stainless steel units (2-1/2 in - 8 in) and the FDA epoxy coated ductile iron units (10 in and 12 in) are easily maintained in the line without any special tools. The TriForce™ check valves operate with a spring assist in the flowing condition to provide excellent flow rates which are documented by an independent laboratory.
Specifications
Item Features
- Easy maintenance no special tools required
- Low pressure loss as documented by an independent laboratory
- Center-stem guided TriForce™ check valves
- Approved for horizontal flow
- Bolted-In checks
- Domestic assembly
- Lead free - The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average, complies with Federal Public Law 111-380, ANSI 3rd party approved and listed