Titan® CV41ADSV0600 CV 41-DI Dual Disc Wafer Check Valve, 6 in, Flanged, 150 lb, Ductile Iron Body, Viton Seat, Stainless Steel Disc
CBPN: 251226
UPC:046564017030
MPN:CV41ADSV0600
DESCRIPTION
Titan® Check Valve, Dual Disc Wafer, Series: CV 41A-DI, 6 in Nominal, Flanged, 250 psi WOG, 150 lb, 100 deg F, 3.75 in Inlet to Outlet Length, Ductile Iron Body, 300 Stainless Steel/FKM Trim, Epoxy Painted, 9.87 in OD
Check Valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against backflow, which could harm the pump or other equipment.
Product Update: The Titan CV41 series has been replaced by CV41A. Face-to-face dimensions have changed - please review specifications to confirm fit and compatibility.
Titan® CV41ADSV0600 CV 41-DI Dual Disc Wafer Check Valve, 6 in, Flanged, 150 lb, Ductile Iron Body, Viton Seat, Stainless Steel Disc
CBPN: 251226
MPN:CV41ADSV0600
UPC:046564017030
DESCRIPTION
Titan® Check Valve, Dual Disc Wafer, Series: CV 41A-DI, 6 in Nominal, Flanged, 250 psi WOG, 150 lb, 100 deg F, 3.75 in Inlet to Outlet Length, Ductile Iron Body, 300 Stainless Steel/FKM Trim, Epoxy Painted, 9.87 in OD
Check Valves are automatic shut-off valves that are commonly used for preventing backflow or drainage in a piping system. Often applied on the discharge side of pumps, check valves prevent the system from draining if the pump stops and protect against backflow, which could harm the pump or other equipment.
Product Update: The Titan CV41 series has been replaced by CV41A. Face-to-face dimensions have changed - please review specifications to confirm fit and compatibility.
Specifications
Item Features
- Cost efficient design: Low weight and short laying length produce savings in initial cost, space requirements, and installation when compared to full body, swing type check valves
- Minimal head loss: Contour of body provides a short and straight flow path that generates very little turbulence
- Additionally, the spring loaded disc is designed with very low cracking pressure which reduces the amount of energy required to open the valve
- Quick closure to reduce water hammer: Shut-off is achieved via the fully automatic, spring assisted discs that close near zero flow velocity
- The lightweight, split disc design creates a positive shutoff prior to flow reversal and helps to keep slamming and surges to a minimum
- Ductile iron body maintains the anti-corrosive properties of cast iron while achieving a yield strength comparable to carbon steel
- Ductile iron also offers higher pressure/temperature ratings than cast iron
- Versatile design: Sizes 2 in through 6 in are designed to fit bolt circle patterns for both cast iron ANSI classes 125/300 and ductile iron ANSI classes 150/300
- Resilient soft seats (EPDM, FKM or Buna-N) ensure a bubble tight seal that meets or exceeds API 598 test requirements
