Taco® LTA0243S-2 LT Series Low Water Cut-Off, 24 V DC, 32 to 150 deg F, 250 psi Pressure, Automatic Reset, NPT Connection
CBPN: 307048
MPN:LTA0243S-2
DESCRIPTION
Taco®, LTA0243S-2, Low Water Cut-Off, Series: LT Series, 24 V DC, 32 to 150 deg F, 250 psi Pressure, Automatic Reset, NPT Connection, 3/4 in Thread, 2.8 VA Power, 3.75 in Length, 3.66 in Width, 5.53 in Height
The Low Water Cutoff (LTA-2) is a microprocessor based low water cutoff for detecting the presence to water in a boiler. The LTA-2 uses advanced signal processing to identify when the probe signal levels have decreased due to possible fouling. These advanced technologies permit extended operation for probe impedance up to 40K Ohms. The LTA-2 functions longer without requiring probe cleaning, and it functions normally under non-ideal installation conditions. The LTA-2 is designed for use with hot water boilers and hot water heating boilers. (See each boiler manufacturers' specifications for recommended minimum safe water levels.) During a low water condition, the Status LED will illuminate RED. Under normal conditions, it will illuminate GREEN. See Status LED States table for details.
Taco® LTA0243S-2 LT Series Low Water Cut-Off, 24 V DC, 32 to 150 deg F, 250 psi Pressure, Automatic Reset, NPT Connection
CBPN: 307048
MPN:LTA0243S-2
DESCRIPTION
Taco®, LTA0243S-2, Low Water Cut-Off, Series: LT Series, 24 V DC, 32 to 150 deg F, 250 psi Pressure, Automatic Reset, NPT Connection, 3/4 in Thread, 2.8 VA Power, 3.75 in Length, 3.66 in Width, 5.53 in Height
The Low Water Cutoff (LTA-2) is a microprocessor based low water cutoff for detecting the presence to water in a boiler. The LTA-2 uses advanced signal processing to identify when the probe signal levels have decreased due to possible fouling. These advanced technologies permit extended operation for probe impedance up to 40K Ohms. The LTA-2 functions longer without requiring probe cleaning, and it functions normally under non-ideal installation conditions. The LTA-2 is designed for use with hot water boilers and hot water heating boilers. (See each boiler manufacturers' specifications for recommended minimum safe water levels.) During a low water condition, the Status LED will illuminate RED. Under normal conditions, it will illuminate GREEN. See Status LED States table for details.
Specifications
Item Features
- Probe sensitivity - 20 kOhm, extended operation to 40 kOhm
- 50 VA pilot rating
- 32 to 150 deg F ambient temperature
- Enclosure rating - NEMA 1 for indoor use only
- Automatic reset when water level returns to safe level
- Integrated test switch for testing safety shutdown
- Patented Adjustable Probe Sensitivity
- External LEDs and Simplified Wiring for Easy
- Installation and Testing
- Automatic or Manual Reset Mode
- Available in 24 VAC or 120 VAC
- Standard On-Board (NEMA 1) or Remote (NEMA 4) Probe 1/2 or 3/4 NPT Connection
- LT Models Include External Test Button, Adjustable Delay On Break (DOB) and Delay or Make (DOM)
- Maximum Fluid Temperature: 250 F
