Cooney Brothers
Home
Home

Products

Products

Spirax Sarco FT75 Float and Thermostatic Steam Trap

Spirax Sarco 50930, FT75 Float and Thermostatic Steam Trap, 3/4 in, FNPT, 450 deg F, 75 psi, Cast Iron

CBPN:7478

MPN:50930

Price:
$527.80 / EA

DESCRIPTION

Spirax Sarco Float and Thermostatic Steam Trap, 3/4 in Nominal, FNPT, 6.2 in Length, 75 psi, Cast Iron, 450 deg F

The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensable gases are released by a separate internal balanced pressure thermostatic air vent.

Spirax Sarco FT-75 Steam Traps are convenient to maintain as they can be serviced without disrupting piping connections. Nonetheless, prior to any maintenance, it's crucial to fully isolate the trap from both the supply and return lines. Periodic disassembly of the trap is necessary for thorough inspection and cleaning of its valve head, seat, operating mechanism, and air vent. Any worn or damaged components should be replaced using an air vent assembly or complete valve mechanism assembly. The Spirax FT-75 Rebuild Kit includes Air Vent Assembly and Valve Mechanism with Float attached to a Cover and supplied with a Cover Gasket, Nameplate and a set of Cover Bolts. Gasket kits are also available (sold in sets of 3).

Spirax Sarco 50930, FT75 Float and Thermostatic Steam Trap, 3/4 in, FNPT, 450 deg F, 75 psi, Cast Iron

CBPN:7478

MPN:50930

Price:
$527.80 / EA
 
Spirax Sarco logo

DESCRIPTION

Spirax Sarco Float and Thermostatic Steam Trap, 3/4 in Nominal, FNPT, 6.2 in Length, 75 psi, Cast Iron, 450 deg F

The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensable gases are released by a separate internal balanced pressure thermostatic air vent.

Spirax Sarco FT-75 Steam Traps are convenient to maintain as they can be serviced without disrupting piping connections. Nonetheless, prior to any maintenance, it's crucial to fully isolate the trap from both the supply and return lines. Periodic disassembly of the trap is necessary for thorough inspection and cleaning of its valve head, seat, operating mechanism, and air vent. Any worn or damaged components should be replaced using an air vent assembly or complete valve mechanism assembly. The Spirax FT-75 Rebuild Kit includes Air Vent Assembly and Valve Mechanism with Float attached to a Cover and supplied with a Cover Gasket, Nameplate and a set of Cover Bolts. Gasket kits are also available (sold in sets of 3).

Specifications

BrandSpirax Sarco
Weight9lbs
Nominal Size3/4 in
End StyleFNPT
Max Operating Pressure75 psig
Max Allowable Pressure125 psig/up to 450 deg F
Max Allowable Temperature450 deg F/up to 125 psig
MaterialCast Iron
Length6.2 in
Manufacturer NameSpirax-Sarco Inc
SeriesFT75
ApplicationAll process equipment, particularly when controlled by modulating temperature control valves, also for unit heaters, air heating coils, heat exchangers and steam main drip stations
Standards and ApprovalsASTM A126 Class B Body

Item Features

  • 450 deg F Maximum operating temperature
  • 125 psig at 450 deg F Maximum allowable pressure
  • 450 deg F at 0 to 120 psig Maximum allowable temperature
  • Parallel piping configuration
  • Stainless steel internals