Spirax Sarco 1803051, BT6-BH High Capacity Balanced Pressure Thermostatic Steam Trap, 3/4 in, Sanitary Clamp, 165 deg C, 6 bar, 316L Stainless Steel
CBPN:134357
MPN:1803051
DESCRIPTION
Spirax Sarco Thermostatic Steam Trap, Balanced Pressure, 3/4 in Nominal, Sanitary Clamp, 65 mm Length, 6 bar, 316L Stainless Steel, 165 deg C, 64 mm W
The Spirax Sarco® BT6-B sanitary balanced pressure thermostatic steam trap is designed to remove condensate from clean and pure steam applications with minimal condensate retention. Applications include sterile steam barriers, block and bleed installations, mains drainage and CIP/SIP of vessels and reactors and process lines. Manufactured in 316L, the crevice free body design of the BT6-B incorporates a 15 deg angled seat to ensure full drainability. The standard element is extremely sensitive to changes in condensate temperature and is designed to open with a minimum of sub-cooling, less than 2 deg C from steam saturation temperature at pressures below 2.5 bar g for typical operating conditions. Exact operating performance may be affected by operating pressure, installation and ambient conditions. Each trap is individually packaged within a 'clean' environment with protective end caps and sealed in a protective plastic bag.
Spirax Sarco 1803051, BT6-BH High Capacity Balanced Pressure Thermostatic Steam Trap, 3/4 in, Sanitary Clamp, 165 deg C, 6 bar, 316L Stainless Steel
CBPN:134357
MPN:1803051
DESCRIPTION
Spirax Sarco Thermostatic Steam Trap, Balanced Pressure, 3/4 in Nominal, Sanitary Clamp, 65 mm Length, 6 bar, 316L Stainless Steel, 165 deg C, 64 mm W
The Spirax Sarco® BT6-B sanitary balanced pressure thermostatic steam trap is designed to remove condensate from clean and pure steam applications with minimal condensate retention. Applications include sterile steam barriers, block and bleed installations, mains drainage and CIP/SIP of vessels and reactors and process lines. Manufactured in 316L, the crevice free body design of the BT6-B incorporates a 15 deg angled seat to ensure full drainability. The standard element is extremely sensitive to changes in condensate temperature and is designed to open with a minimum of sub-cooling, less than 2 deg C from steam saturation temperature at pressures below 2.5 bar g for typical operating conditions. Exact operating performance may be affected by operating pressure, installation and ambient conditions. Each trap is individually packaged within a 'clean' environment with protective end caps and sealed in a protective plastic bag.
Specifications
Item Features
- High capacity
- Internal surfaces have a finish of 0.6 um (25 micro-inch Ra, ASME BPE SFV2)
- External surfaces have a finish of 1.0 um (40 micro-inch Ra)
- Mechanical and electro polishing to 0.375 um (15 micro-inch Ra, ASME BPE SFV4)
- For applications requiring closer to steam saturation temperatures, for example, critical SIP applications, please consult Spirax Sarco®
- The BT6-B has been designed and built in general accordance to ASME BPE and complies with the requirements of the European pressure equipment directive 97/23/EC
- All seals comply with FDA CFR title 21, part 177, section 1550 and USP class VI sections 87 and 88, ADI (Animal Derived Ingredient free)
- Typical internal surface finish certificates
- Certificate of conformity of the seal for FDA, USP and ADI
- The body is crevice free, self draining
- A high capacity version is available for high condensate loads or where CIP/SIP fluids are used
- 165 deg C at 6 bar g Maximum operating temperature
- PN10 Body design condition
- 10 bar g at 140 deg C
- 177 deg C at 9.2 bar g Maximum allowable temperature
- 6 bar g Maximum operating pressure for saturated steam service
- -254 deg C Minimum allowable temperature
- 0 deg C Minimum operating temperature
- 15 bar g Maximum cold hydraulic test pressure
- Vertical piping configuration