CRANE® L33-1/2XUF-20 Gate Valve, 20 in Nominal, Butt Weld End Style, 300 lb, Cast Steel Body, Hand Wheel Actuator
CBPN: 238595
MPN:L33-1/2XUF-20
DESCRIPTION
CRANE® Gate Valve, Series: L33-1/2, 20 in Nominal, Butt Weld, 740 psi, 300 lb, -20 to 100 deg F, Hand Wheel Actuator, 39 in Inlet to Outlet Length, 86.50 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing, 28.35 in Hand Wheel
CRANE® cast steel gate valves offer the ultimate in dependable service for steam, air, gas, oil, oil vapor, and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion, and resistance to flow. They are available in a wide variety of trims.
Alternate trims are available. Please contact us for information. Crane recommends the use of manual or powered gear assistance for sizes 8" and larger. Dimensions and weights shown are based on a gear actuator.
CRANE® L33-1/2XUF-20 Gate Valve, 20 in Nominal, Butt Weld End Style, 300 lb, Cast Steel Body, Hand Wheel Actuator
CBPN: 238595
MPN:L33-1/2XUF-20
DESCRIPTION
CRANE® Gate Valve, Series: L33-1/2, 20 in Nominal, Butt Weld, 740 psi, 300 lb, -20 to 100 deg F, Hand Wheel Actuator, 39 in Inlet to Outlet Length, 86.50 in Top to Inlet Center, Cast Steel Body, 410 Stainless Steel Trim, Graphite Packing, 28.35 in Hand Wheel
CRANE® cast steel gate valves offer the ultimate in dependable service for steam, air, gas, oil, oil vapor, and high pressure installations. All have straight-through ports to assure minimum turbulence, erosion, and resistance to flow. They are available in a wide variety of trims.
Alternate trims are available. Please contact us for information. Crane recommends the use of manual or powered gear assistance for sizes 8" and larger. Dimensions and weights shown are based on a gear actuator.
Specifications
Item Features
- Outside screw and yoke; Flexible wedge disc; All seat rings are seal welded as standard; F6/Hard faced nominal trim; 13 CrASTM A217 (CA 215) CoCra seating surface
