Zoeller® 3098-0001 3000 High Temperature Submersible Dewatering Pump, 115 gpm Flow Rate, 1-1/2 to 3 in Outlet, 1 ph, 1/2 hp, Cast Iron
CBPN: 300713
UPC:053514034092
MPN:3098-0001
DESCRIPTION
Zoeller® Submersible Dewatering Pump, High Temperature, Series: 3000, 115 gpm, 1-1/2 to 3 in Outlet, 60 ft Maximum Head, 115 VAC, 9.4 A, 1 ph ph, 200 deg F, 1/2 hp, Non-Clogging Vortex Impeller, SOOW 14/3, 16/3 AWG Cord, Cast Iron
In high head dewatering or effluent applications where pumping performance is critical, this robust family of pumps is known for reliability, durability and performance. These pumps are especially suited for harsh environments. Zoeller® cool run design and corrosion-resistant, epoxy powder coated finish add up to a long-lasting, trouble-free product.
Zoeller® 3098-0001 3000 High Temperature Submersible Dewatering Pump, 115 gpm Flow Rate, 1-1/2 to 3 in Outlet, 1 ph, 1/2 hp, Cast Iron
CBPN: 300713
MPN:3098-0001
UPC:053514034092
DESCRIPTION
Zoeller® Submersible Dewatering Pump, High Temperature, Series: 3000, 115 gpm, 1-1/2 to 3 in Outlet, 60 ft Maximum Head, 115 VAC, 9.4 A, 1 ph ph, 200 deg F, 1/2 hp, Non-Clogging Vortex Impeller, SOOW 14/3, 16/3 AWG Cord, Cast Iron
In high head dewatering or effluent applications where pumping performance is critical, this robust family of pumps is known for reliability, durability and performance. These pumps are especially suited for harsh environments. Zoeller® cool run design and corrosion-resistant, epoxy powder coated finish add up to a long-lasting, trouble-free product.
Specifications
Item Features
- A high temperature submersible pump series with electrical components meeting the national electrical code requirements for 200 deg F service
- Comprehensive line of models, styles and modes
- Conduit length is 3 ft for automatic models and 6 ft for non-automatic models
- Power cord length is 15 ft (5 m) for automatic models and supplied by others for non-automatic models
- High temperature liquid-tight conduit used with high temperature cable
- High temperature motor windings
- High temperature FKM gaskets
- High temperature thermal overload protected
- All control components in contact with water are high temperature rated
- All models have stainless steel screws, guards, handles and control arm and seal assemblies
- Float-operated mechanical switch box, which is mounted on the discharge pipe above the operating level (switch box is not intended to come in continuous contact with 200 deg F water)
- Mechanical seal has NI-Resist rotary face and FKM elastomer
- Corrosion resistant, powder coated epoxy
- High-temperature FKM gasket
- AISI cold rolled steel motor shaft
