Zoeller® 282-0002 Waste-Mate 280 1-Seal Non-Automatic/Manual Operation Submersible Sewage Pump, 1/2 hp, 115 VAC, 2 or 3 in FNPT Outlet, Cast Iron, 10.3 A, 1 ph
CBPN: 300718
UPC:053514018351
MPN:282-0002
DESCRIPTION
Zoeller® Submersible Sewage Pump, 1-Seal, Series: Waste-Mate 280, 127 gpm, 2 or 3 in FNPT Outlet, 26 ft Maximum Head, 1/2 hp, 115 VAC, 10.3 A, 60 Hz Frequency, 1 ph ph, 1725 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 13-9/16 in W x 19-9/16 in H Dimensions
Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller® cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, epoxy powder coated finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.
Zoeller® 282-0002 Waste-Mate 280 1-Seal Non-Automatic/Manual Operation Submersible Sewage Pump, 1/2 hp, 115 VAC, 2 or 3 in FNPT Outlet, Cast Iron, 10.3 A, 1 ph
CBPN: 300718
MPN:282-0002
UPC:053514018351
DESCRIPTION
Zoeller® Submersible Sewage Pump, 1-Seal, Series: Waste-Mate 280, 127 gpm, 2 or 3 in FNPT Outlet, 26 ft Maximum Head, 1/2 hp, 115 VAC, 10.3 A, 60 Hz Frequency, 1 ph ph, 1725 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 13-9/16 in W x 19-9/16 in H Dimensions
Heavy duty construction, oversized bearings and balanced non-clogging vortex impellers allow these pumps to stand up to the highest heads and maximum flows. Using Zoeller® cool run design, we added fins to these pumps, lowering operating temperatures. The corrosion resistant, epoxy powder coated finish and hermetically sealed, oil- filled motor add up to a long lasting, trouble-free product.
Specifications
Item Features
- Durable, cast iron constructed switch case, motor and pump housing, base and impeller
- No sheet metal parts to rust or corrode
- All cast iron class 30 30000 lb tensile strength
- Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
- Shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
- SAE 1117 carbon steel motor shaft (single seal models)
- Upper and lower ball bearing running in bath of oil
- Oil filled, hermetically-sealed, automatic reset thermal overload protected motor (1 ph and auto 3 ph)
- All models pass 2 in spherical solids
- Corrosion-resistant, powder coated epoxy finish
- Non-automatic operation
- 15 ft L cord
- Permanent split capacitor or 3 ph motor
- Class B insulation
