Spirax Sarco Pivotrol® 72896.3 PTF Top Inlet Pressure Powered Pump With Check Valve, Fabricated Steel Body, 3 in Inlet x 3 in Outlet, FNPT/ANSI 150 Flanged Connection
CBPN: 239021
MPN:72896.3
DESCRIPTION
Spirax Sarco Pivotrol® Pressure Powered Pump, Top Inlet, 90 gpm, 3 in Inlet, 3 in Outlet, NPT/ANSI 150 Flanged, 200 psig Operating Maximum, Stainless Steel Float, 400 deg F Operating, Fabricated Steel Body, 19.2 in L x 44.7 in H
The Spirax Sarco Pivotrol® Pump (patented) is a non electric pump which transfers high temperature condensate, or other liquids from a low point, low pressure or vacuum space to an area of higher pressure or elevation. This self-contained unit including PowerPivot® technology (patented) uses steam, compressed air or any other suitable pressurized gas as the pumping force.
Spirax Sarco Pivotrol® 72896.3 PTF Top Inlet Pressure Powered Pump With Check Valve, Fabricated Steel Body, 3 in Inlet x 3 in Outlet, FNPT/ANSI 150 Flanged Connection
CBPN: 239021
MPN:72896.3
DESCRIPTION
Spirax Sarco Pivotrol® Pressure Powered Pump, Top Inlet, 90 gpm, 3 in Inlet, 3 in Outlet, NPT/ANSI 150 Flanged, 200 psig Operating Maximum, Stainless Steel Float, 400 deg F Operating, Fabricated Steel Body, 19.2 in L x 44.7 in H
The Spirax Sarco Pivotrol® Pump (patented) is a non electric pump which transfers high temperature condensate, or other liquids from a low point, low pressure or vacuum space to an area of higher pressure or elevation. This self-contained unit including PowerPivot® technology (patented) uses steam, compressed air or any other suitable pressurized gas as the pumping force.
Specifications
Item Features
- NPT cover
- 8.4 gal nominal pump discharge per cycle
- 3 lb of steam/1000 lb of liquid pumped air consumption
- 5 psig minimum motive differential pressure
- 200 psig at 400 deg F and 125 psig at 650 deg F maximum allowable pressure
- 400 deg F at 200 psig and 650 deg F at 125 psig maximum allowable temperature
- Stainless steel check valve
- 60 SCF/1000 lb of liquid pumped air consumption
- 0.8 to 0.89 specific gravity
- 6 maximum number of cycles per minute
- Filling head recommended above centerline of inlet check valve in 12 in
