Spirax Sarco 2103190 BRV71 Pressure Reducing Valve, 1 in Nominal, NPT End Style, 16 bar Pressure, 184 deg C
CBPN:65185
MPN:2103190
Price:
$1869.14 / EA
DESCRIPTION
Spirax Sarco Pressure Reducing Valve, 1 in Nominal, NPT End Style, 16 bar Pressure, 184 deg C, SG Iron Body, Media: Steam, EPDM O-Ring Softgoods, Handwheel Actuator, 134 in W Dimensions
The BRV71 (screwed) and BRV73 (flanged) are SG iron bodied direct acting pressure reducing valves designed for applications using steam. The BRV71 and BRV73 pressure reducing valves are supplied with one of three color coded springs which are identified by the disc (13) located on the adjustment handwheel.
To see a diagram and listing of available replacement parts for the Spirax Sarco 2103190 Pressure Reducing Valve, visit our Spirax Sarco 2103190 Pressure Reducing Valve Spare Parts Selection Guide.
Spirax Sarco 2103190 BRV71 Pressure Reducing Valve, 1 in Nominal, NPT End Style, 16 bar Pressure, 184 deg C
CBPN:65185
MPN:2103190
Price:
$1869.14 / EA
DESCRIPTION
Spirax Sarco Pressure Reducing Valve, 1 in Nominal, NPT End Style, 16 bar Pressure, 184 deg C, SG Iron Body, Media: Steam, EPDM O-Ring Softgoods, Handwheel Actuator, 134 in W Dimensions
The BRV71 (screwed) and BRV73 (flanged) are SG iron bodied direct acting pressure reducing valves designed for applications using steam. The BRV71 and BRV73 pressure reducing valves are supplied with one of three color coded springs which are identified by the disc (13) located on the adjustment handwheel.
To see a diagram and listing of available replacement parts for the Spirax Sarco 2103190 Pressure Reducing Valve, visit our Spirax Sarco 2103190 Pressure Reducing Valve Spare Parts Selection Guide.
Specifications
Brand: Spirax Sarco
Weight: 13lbs
Actuator Type: Handwheel
Body Material: SG Iron
End Style: NPT
Nominal Size: 1 in
Temperature Rating: 184 deg C
Pressure Rating: 2 to 25
Dimensions: 134 in W
Media: Steam
Softgoods Material: EPDM O-Ring
Manufacturer Name: Spirax-Sarco Inc
Standards and Approvals: DIN 1693 GGG 40.3 Body Assembly
Item Features
- PN16 body design conditions
- 16 bar g at 120 deg C Maximum allowable pressure
- 184 deg C at 10 bar g Maximum allowable temperature
- -10 deg C minimum allowable temperature
- 10 bar g Maximum operating pressure for saturated steam service
- Maximum recommended turndown ratio 10:1 at Maximum flow
- Designed for a Maximum cold hydraulic test pressure of 24 bar g
- Flanged weights are typical of the BRV73 model and the figures quoted are based on the PN16 version
- Aluminum spring housing
- Semi-rigid graphite laminated gasket
- 153 mm inlet top to inlet center
- 10 bar Maximum differential pressure
- Note: Where control spring ranges overlap always use the lower range to give better control
- Note: with internals fitted, test pressure must not exceed 16 bar g
