Spirax Sarco 0668790, FT14-10 Ball Float Steam Trap, 2 in, FNPT, 220 deg C, 145 psi, Cast Iron
CBPN:12770
MPN:0668790
DESCRIPTION
Spirax Sarco Ball Float Steam Trap, 2 in Nominal, NPT, 300 mm Length, 145 psi, Cast Iron, 220 deg C
The FT14 and FT14HC are iron bodied ball float steam traps having stainless steel working internals and integral automatic air venting facility. These traps are supplied with horizontal screwed connections only and can be maintained without disturbing the pipework. The flow direction is as indicated on the valve body.
Spirax Sarco 0668790, FT14-10 Ball Float Steam Trap, 2 in, FNPT, 220 deg C, 145 psi, Cast Iron
CBPN:12770
MPN:0668790
DESCRIPTION
Spirax Sarco Ball Float Steam Trap, 2 in Nominal, NPT, 300 mm Length, 145 psi, Cast Iron, 220 deg C
The FT14 and FT14HC are iron bodied ball float steam traps having stainless steel working internals and integral automatic air venting facility. These traps are supplied with horizontal screwed connections only and can be maintained without disturbing the pipework. The flow direction is as indicated on the valve body.
Specifications
Item Features
- Extremely versatile traps
- Work efficiently on both light and heavy condensate loads
- Compact in size
- Discharge capacity is high and continuous, ensuring Maximum heat transfer
- Ball float steam traps are the best choice for draining plant with automatic temperature control
- An integral air vent is fitted as standard and a steam lock release is an option
- The BP99/32 capsule which is used in the FT14 and FT14HC ball float steam traps is suitable for use on 150 deg C superheat at 0 bar g and 50 deg C superheat at 32 bar g
- This product fully complies with the requirements of the European pressure equipment directive 97/23/EC
- 16 bar g at 100 deg C Maximum allowable pressure
- 220 deg C at 13.5 bar g Maximum allowable temperature
- -10 deg C Minimum allowable temperature
- 10 bar Maximum differential pressure
- 14 bar g Maximum operating pressure for saturated steam service
- 24 bar g Maximum cold hydraulic test pressure
- PN16 Body design condition
- In-Line horizontal piping configuration