Bonomi E541S-002-8 541S 2-Way Rubber Lined Direct Mount Lug Style Electric Actuated Butterfly Valve, 8 in, Ductile Iron Body, 24V AC/DC, BUNA-N Softgoods, Import
CBPN: 230635
MPN:E541S-002-8
DESCRIPTION
Bonomi North America Butterfly Valve Package, 2-Way Rubber Lined Direct Mount Lug Style, Series: 541S, 8 in Nominal, Flanged, 10 to 250 deg F, Media: Water, On/Off Electric Actuator, 2.36 in Inlet to Outlet Length, 16.03 in Top to Inlet Center, Ductile Iron Body, Stainless Steel Disc, Carbon Steel (Locating Pin) Stem & Pin Material, EPDM, Epoxy Powder Coated, 9.33 in W x 18.59 in H, Import
Bonomi North America series EN501S, ductile iron lug style, epoxy coated, resilient seat butterfly valves in sizes 1-1/2 to 12 in, with EPDM seat are NSF/ANSI 61/372 certified. This series shall offer a dual stem design and ISO 5211/DIN 3337 direct mounting for high cycle automation capabilities. In addition, the EN501S series features a phenolic-backed cartridge seat design which offers a 250 CWP maximum pressure rating, deadend service to 100 psi, and conforms to ANSI B16.1 and ANSI B16.5. The EN501 series includes an electric actuator with a high-strength, weather-proof techno-polymer housing with a heater and thermostat included. The NEMA 4, 4X housing is resistant to dusty areas, and in areas where water may be sprayed.
Bonomi E541S-002-8 541S 2-Way Rubber Lined Direct Mount Lug Style Electric Actuated Butterfly Valve, 8 in, Ductile Iron Body, 24V AC/DC, BUNA-N Softgoods, Import
CBPN: 230635
MPN:E541S-002-8
DESCRIPTION
Bonomi North America Butterfly Valve Package, 2-Way Rubber Lined Direct Mount Lug Style, Series: 541S, 8 in Nominal, Flanged, 10 to 250 deg F, Media: Water, On/Off Electric Actuator, 2.36 in Inlet to Outlet Length, 16.03 in Top to Inlet Center, Ductile Iron Body, Stainless Steel Disc, Carbon Steel (Locating Pin) Stem & Pin Material, EPDM, Epoxy Powder Coated, 9.33 in W x 18.59 in H, Import
Bonomi North America series EN501S, ductile iron lug style, epoxy coated, resilient seat butterfly valves in sizes 1-1/2 to 12 in, with EPDM seat are NSF/ANSI 61/372 certified. This series shall offer a dual stem design and ISO 5211/DIN 3337 direct mounting for high cycle automation capabilities. In addition, the EN501S series features a phenolic-backed cartridge seat design which offers a 250 CWP maximum pressure rating, deadend service to 100 psi, and conforms to ANSI B16.1 and ANSI B16.5. The EN501 series includes an electric actuator with a high-strength, weather-proof techno-polymer housing with a heater and thermostat included. The NEMA 4, 4X housing is resistant to dusty areas, and in areas where water may be sprayed.
Specifications
Item Features
- ISO 5211 direct mount/square stem
- Floating dual shaft disc design
- No pins in disc prevent potential leak points
- EPDM O-ring
- Valbia UL approved standard on/off 24 VDC plastic electric actuator
