Zoeller® 53-0001
Zoeller®

Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent or Dewatering Submersible Pump, 43 gpm, 1-1/2 in Outlet, 3/10 hp, Cast Iron

Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent or Dewatering Submersible Pump, 43 gpm, 1-1/2 in Outlet, 3/10 hp, Cast Iron

Zoeller Company


MPN: 53-0001

UPC: 053514023607

CBPN: 8485
loading
Price: loading
Qty:
loading

DESCRIPTION

Zoeller® Effluent or Dewatering Submersible Pump, Automatic, Series: Mighty-Mate M53, 43 gpm, 1-1/2 in Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 10.0625 in H x 10.06 in W


The "Mighty-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

FEATURES

  • Float operated, 2-pole mechanical switch and variable level, long cycle systems available
  • Corrosion resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil-filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, entire unit pressure tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solids handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge

RESOURCES

  • pdf Brochure https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0001_Brochure.pdf
  • pdf Catalog https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0001_Catalog.pdf
  • pdf Instruction/Installation Sheet https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0001_Instruction_Installation.pdf
  • pdf Instruction/Installation Manual https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_53_0001_Manual.pdf
  • pdf Data/Spec Sheet-1 https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_Company_530001_Data_Sheet.pdf
  • pdf Specification Sheet https://www.cooneybrothers.com//ASSETS/DOCUMENTS/ITEMS/EN/Zoeller_Company_530001_Specification_Sheet.pdf

loading

Availability By Branch

Branch Name Available

Write Review

Atleast 50 Characters. You can Express Upto 1000 Characters
  1. Contact Us

    • Cooney Brothers, Inc.
      1850 Gravers Road, #100
      Plymouth Meeting, PA 19462-2837
    • Phone: 610-272-2100
    • Fax: 610-272-7072
    • Contact us directly
  2. Email Signup

      Sign up to receive updates from Cooney Brothers

Copyright © , Cooney Brothers - All Rights Reserved.
loading
NEED HELP?

GET IN TOUCH

CONTACT CUSTOMER SERVICE

SEND A MESSAGE CALL 610-272-2100

We'll be in touch with you as soon as possible.

  • Subject:

  • Your Message:

  • Your Contact Info:

We generally respond within 1 to 3 hours during our business day (Monday-Friday, 8am-5pm).


You can also reach us at (610) 272-2100

An Email Id is required to process your orders. Please enter your email id and click update.