Gruvlok® Clamp-T Branch Outlet, Series: FIG 7045, 3 x 2 in Nominal, FNPT, SCH 40/STD, 500 psi, -20 to 180 deg F, 1/2 x 2-3/4 in Bolt, Steel Bolt, Ductile Iron Clamp, Grade T Nitrile Gasket, 6-7/8 in W x 4-1/8 in THK, Galvanized, Domestic

The Gruvlok® Clamp-T provides a quick and easy outlet at any location along the pipe. A hole drilled or cut in the pipe to receive the locating collar of the Clamp-T is all that is required. The full, smooth outlet area provides for optimum flow characteristics. The Clamp-T housing is specially engineered to conform to the pipe OD and the Clamp-T gasket providing a leak-tight reliable seal in both positive pressure and vacuum conditions. The maximum working pressure for all sizes is 500 psi (34.5 bar) when assembled on standard wall steel pipe. The Gruvlok® Clamp-T provides for a branch or cross connection in light wall or standard wall steel pipe. The Fig. 7045 Clamp-T female pipe thread branch is available with NPT or ISO 7/1 connection and the Fig. 7046 Clamp-T has grooved end branch connection. Clamp-T cross connections are available in various sizes allowing greater versatility in piping design.