Cooney Brothers
Home
Home

Products

Products

GRUVLOK  AN-7721-3 Butterfly Valve

Gruvlok® 07005011783 AN-7721-3 Butterfly Valve, 4 in, Grooved, Ductile Iron Body

CBPN:36599

UPC:690291828270

MPN:07005011783

Price:
$606.39 / EA

DESCRIPTION

Gruvlok® Butterfly Valve, Series: FIG 7700, 4 in Nominal, Grooved, -40 to 230 deg F, 10-Position Lever-Lock Handle Actuator, 4-5/8 in Inlet to Outlet Length, 6-1/2 in Top to Inlet Center, Ductile Iron Body, Ductile Iron Disc, 416 Stainless Steel (Stem) Stem & Pin Material, Nylon Coated, 4-1/2 in OD

The uniqueness of the Series 7700 Gruvlok Butterfly Valve begins with the spherical bore of the disc seat area. This facilitates a constant DISC-TO-SEAT loading that maintains a leak tight stem seal regardless of disc position. The stem sealing force is constant through the full disc cycle and operating torques are kept low which increases valve life. The design provides a bubble tight seal from full vacuum to 300 psi when the valve is closed. The valve is rated for dead-end service to a full pressure rating of 300 psi. Silicone Free Series 7700 available upon special request. The stem-to-disc connection provides zero backlash. The high strength, corrosion resistant, stainless steel stems are blow-out proof. Each stem is fitted with a secondary seal that also provides a lifetime lubrication chamber. The Series 7700 valve is designed with the contractor in mind. The valve body is a rugged one-piece casting with an integral mounting base for gear operator or handle actuation, while providing room for a minimum of 2 in of pipe insulation. The valve is designed and manufactured to meet or exceed the requirements of MSS SP-67.

Gruvlok® 07005011783 AN-7721-3 Butterfly Valve, 4 in, Grooved, Ductile Iron Body

CBPN:36599

MPN:07005011783

UPC:690291828270

Price:
$606.39 / EA
 
Gruvlok Logo

DESCRIPTION

Gruvlok® Butterfly Valve, Series: FIG 7700, 4 in Nominal, Grooved, -40 to 230 deg F, 10-Position Lever-Lock Handle Actuator, 4-5/8 in Inlet to Outlet Length, 6-1/2 in Top to Inlet Center, Ductile Iron Body, Ductile Iron Disc, 416 Stainless Steel (Stem) Stem & Pin Material, Nylon Coated, 4-1/2 in OD

The uniqueness of the Series 7700 Gruvlok Butterfly Valve begins with the spherical bore of the disc seat area. This facilitates a constant DISC-TO-SEAT loading that maintains a leak tight stem seal regardless of disc position. The stem sealing force is constant through the full disc cycle and operating torques are kept low which increases valve life. The design provides a bubble tight seal from full vacuum to 300 psi when the valve is closed. The valve is rated for dead-end service to a full pressure rating of 300 psi. Silicone Free Series 7700 available upon special request. The stem-to-disc connection provides zero backlash. The high strength, corrosion resistant, stainless steel stems are blow-out proof. Each stem is fitted with a secondary seal that also provides a lifetime lubrication chamber. The Series 7700 valve is designed with the contractor in mind. The valve body is a rugged one-piece casting with an integral mounting base for gear operator or handle actuation, while providing room for a minimum of 2 in of pipe insulation. The valve is designed and manufactured to meet or exceed the requirements of MSS SP-67.

Specifications

BrandGruvlok®
Weight15lbs
Actuator Type10-Position Lever-Lock Handle
Body MaterialDuctile Iron
End StyleGrooved
Nominal Size4 in
SeriesFIG 7700
Temperature Rating-40 to 230 deg F
FinishNylon Coated
Dimensions4-1/2 in OD
Softgoods MaterialDuctile iron disc with EPDM coating
Disc MaterialDuctile Iron
Inlet to Outlet Length4-5/8 in
Manufacturer NameASC Engineered Solutions
Stem & Pin Material416 Stainless Steel (Stem)
Top to Inlet Center6-1/2 in
ApplicationFor used in commercial grooved-end piping systems 2 in through 12 in
Standards and ApprovalsASTM A 536 Grade 65-45-12,cULus Listed,cUPC Listed,FM Approved,LPCB Certified,NSF/ANSI 61 (Cold Water) and Annex G

Item Features

  • Ductile iron disc with grade E EPDM coating
  • For operator safety, hand levers on 8 in valves are limited to applications with a 25 psi maximum pressure